Combating drought - mining reuse water from municipal sludge using supercritical water oxidation - Live Webinar

Member fee: $25.00

Non-Member fee: $35.00 

1.2 Contact Hours towards CWEA Certifications: CSM, ECI & EIT. 

Reuse water used for irrigation and aquifer recharging is especially beneficial in arid and semi-arid regions, but also in general to reduce dependency on other natural resources. In addition, reuse plays an important role in building sustainability and resilience in design and construction. Often overlooked aspect of recovery in municipal wastewater is water from sludge, which typically contains between 75 to 95% moisture. 

A private real estate investment firm in Texas is developing a reclaimed industrial site in Houston with a vision of creating a circular and sustainable waste management opportunity within the new development. The goal is to transform wastewater, food waste, and other recyclable wet organic wastes into recoverable and reusable clean water, energy, and nutrients. The technologies being considered for this approach include membrane bioreactor, supercritical water oxidation and ultraviolet light disinfectant. 
The combination of these technologies’ makeup the treatment scheme for this decentralized water reuse facility, which is being developed in partnership with 374Water, a global social impact, cleantech company that provides unique decentralized water resource recovery facilities. The challenge with a fixed treatment asset is maintaining consistency of wastewater feed. In other words, would the development produce the same or similar volume of waste, with uniform constituents, on a daily basis. 

One way to overcome this challenge and to maximize the beneficial use of the investment, the facility will employ sewer mining, a process where municipal wastewater from the pipeline, with consent from the City, will be drawn and used as a supplement waste to offset variation in waste generated from the development on a daily basis. Simply put, in order to stabilize the flow and feed characteristics of the waste to be treated, wastewater from the sewer will be drawn at a rate that brings the overall waste to the average treatability volume and quality for each of the technologies being employed. This webinar will cover the role of SCWO to transform waste inputs into usable byproducts.

Registrants who view the live webinar to see the slides and hear the audio and then enter the correct attention check code (directions below) will receive 1.8 contact hours towards CWEA's certifications: CSM, ECI & EIT. 

To receive your contact hours for viewing the live webinar, please note the two (2) different attention check codes that will be displayed at two different points during the webinar in the top left or right corner of the presentation for approximately 90 seconds.  Please enter these codes as 1st attention check code – 2nd attention check code (XXXX-XXXX) in the Attention Check Code component under the "Contents" tab.  

Please note, all user activity of CWEA certification holders on the Online Wastewater Education Network is subject to the CWEA Code of Ethics standards for professional conduct and ethics. Certification holders should receive credit for a training only once within the same contact hour period. Any attempt to undermine the certification process may be subject to ethics procedures and possible sanctions. It is not possible to receive contact hours for both attending the live webinar and viewing the recording.  

Once you have entered the correct attendance check codes, you will be able to create and download an electronic certificate of completion under the "Contents" tab.